'04 Twisted Choppers Custom

Twisted Choppers Custom..., One Owner..., Very Cool!!

2004 Twisted Choppers Custom

This is one of the FIRST commissioned Twisted Choppers bikes that were built by the famous custom bike builder from Tea, South Dakota that produces some very unique and unusual "one-off" motorcycles. (Twisted Choppers was the Winner of the '06 "Biker Build-Off" Competition between themselves and the Detroit Brothers, which was held in Sturgis, SD and conducted by the TLC TV Show..! The actual process of building the bike at the two respective shops and the Sturgis voting competition was filmed and later aired on one of the "Biker Build-Off" Shows.) This chopper was owned by a local business man who has ridden and enjoyed the bike now for a couple years since he had Twisted build it for him.

This is a motorcycle that is VERY RIDEABLE..! It is not a wallflower or a trailer queen. In fact, it is so much fun, the owner took it on a sightseeing trip in Canada with some friends and put about 1500 miles on it by the time he returned home! How many choppers are comfortable enough to ride on that long of a trip?

As you can see by the pictures, it has a very unique look and design.

The copper tubing oil lines are one of the trademark "looks" that Twisted uses in there design on a lot of their bikes, and what can you say about the tank..? Is that cool or what..!? (Cobra snake..?!)

With the "tried and true" 107" S&S Fully Polished Engine, 3" BDL Belt Drive, "Killer" Rigid Frame, to the "Recluse" Weld Wheels and many other items, you can see this bike has been built with some excellent components. These vendors and manufacturers are well known and very respected in the industry.

When you read the following list of parts and components, take note of the items that are "one and only" items that were custom fabricated by the Twisted Chopper guys just for this bike.

Here is the partial list of the components and parts on this very cool chopper...

"S&S" Fully Polished 107" Engine (125 h.p.)--------- $6858.11
"Killer Chopper" Rigid Frame ----------------------- $2500.00
3" BDL Belt Drive Kit, (with Diaphragm Spring) ----- $1399.95
Weld Recluse Rear Wheel - Chrome (18/9.5) ---------- $1695.00
Weld Recluse Front Wheel - Chrome (21/3.25) -------- $1250.00
Weld Recluse Front Rotor - Chrome ------------------ $ 375.00
Fully Polished 6 Speed Transmission ---------------- $1300.00
Custom Paint by Dose ------------------------------- $5000.00
Paint Materials ------------------------------------ $ 661.61
Shipping and Handling for Transmission ------------- $  85.00
Shipping and Handling for frame -------------------- $ 100.00
PM Left Side Chrome 4 Piston Caliper (front) ------- $ 449.95
PM Contour Chrome Clutch lever Assembly ------------ $ 229.95
PM Contour Chrome 9/16" Master Cylinder ------------ $ 329.95
PM Contour Chrome Throttle Housing, (single cable) - $  89.95
Fork Cup Bearings ---------------------------------- $  16.88
Bearing Races -------------------------------------- $   7.99
Heavy Duty Black Handlebar Damper Kit -------------- $  23.99
41MM 10" Over Stock Chrome Fork Tubes -------------- $ 150.40
Lower Fork Leg, (Torpedo) -------------------------- $ 517.20
BDL 1.5" Offset Adapter Kit (with nut) ------------- $  85.20
Compufire 32 Amp Charging System for S&S Motors ---- $ 262.57
Inner primary Spacer 1 1/2" ------------------------ $  65.68
BT 36-83 7/16" -14/3/8"- 24 Transmission Studs ----- $  14.89
Hot Match Weld-on Kickstand ------------------------ $ 199.95
5 Degree Triple Trees ------------------------------ $ 490.00
Metzeler ME 880 240/40-18 Rear Tire ---------------- $ 269.95
Metzeler ME 880 90/90H21 Front Tire ---------------- $ 129.95
Chrome 110 Link 530 Series O-Ring Chain ------------ $ 130.99
Stator Mounting Bolts ------------------------------ $    .75
Crane Hi-4 Single fire Ignition W/Coil and Wires --- $ 381.53
Weld Wheel Smooth Hub (plus shipping and handling) - $  86.09
Pingel High Volume Chrome Petcock ------------------ $  74.99
Softail Gas Tank Grommew W/ Sleeve ----------------- $   7.80
23 Tooth Transmission Sprocket (500" Offset) ------- $  69.95
Russel Pro System 2 Brake Fitting 3/8-24 ----------- $  16.95
Russel Pro System II 1/8" 90 Degree Brake Fitting -- $  33.90
Chrome Adapter Fitting ----------------------------- $   7.95
#3 Female Hose End (2)------------------------------ $  33.90
Russel Pro System II (brake hose - 12 ft) ---------- $  21.36
Chrome Oil Filter XL - (2) ------------------------- $  25.90
Autolite Spark Plug 4265 (2) ----------------------- $   7.38
Rick Doss 6.5 Frenched Headlight ------------------- $ 129.99
PM Chrome Renthal Rubber/Billet Hand Grips --------- $ 156.87
Engine Turned Oil Pressure Gauge ------------------- $  26.99
Odyssey Battery ------------------------------------ $ 134.99
Chrome Kelsey Hayes Style Master Cylinder ---------- $  62.99
Arlen Ness Rad II Teardop Mirror ------------------- $  50.98
Phantom Suction Cup Seat (leather with gel) -------- $ 149.95
Dakota Digital Round Mini Speedo ------------------- $ 249.95
Transmission Sensor -------------------------------- $  79.95
Raw Steel Cup for Mini Speedo ---------------------- $  60.00
Kendall 20W/50 Motor Oil (7 quarts) ---------------- $  24.43
Throttle Cable ------------------------------------- $  33.84
10mm 3/8"-24 Brake Light Banjo Bolt ---------------- $  19.99
Diamond LED Tail Light ----------------------------- $  49.95
Vibralok Fitting (straight, 3/8" tube) ------------- $  39.60
Copper Tube (3/8" diameter - 10 feet) -------------- $  30.00
Timing Rotor Screw --------------------------------- $   1.19
.300" Sprocket Spacer ------------------------------ $   8.25
Chrome Oil Filter Mount ---------------------------- $  39.95
Outlaw Front Fender -------------------------------- $ 214.95
Hot Match Pop-Up Gas Cap --------------------------- $ 199.95
Custom Ignition Switch w/ Return Start ------------- $  49.99
Fork Spring Set ------------------------------------ $  40.99
Fork Dampers --------------------------------------- $  24.99
Rebound Spring ------------------------------------- $   9.98
Lower Fork Tube Bushing (41mm) --------------------- $  15.49
Fork Slider Seal Washer (41mm) --------------------- $   2.00
Upper Fork Bushing (41mm) -------------------------- $  15.49
Fork Seal (41mm) ----------------------------------- $   9.80
Retaining Ring (41mm)------------------------------- $   2.90
Exile Chrome Sprocket Brake Kit (50 tooth)---------- $ 699.00
Brake Fluid ---------------------------------------- $   8.25
Transmission Lube ---------------------------------- $   8.95
Clutch Cable --------------------------------------- $  28.95
Shipping and Handling for Exile Sprotor ------------ $  20.00
Chrome Plating ------------------------------------- $ 764.50
Shipping and Handling for Chroming ----------------- $  50.00
Twisted Choppers Machine Gun Forward Control ------- $ 600.00
Internal Fork Stop Kit (SST) ----------------------- $  47.00
Terry Components Starter --------------------------- $ 295.00
Velocity Stack ------------------------------------- $ 236.25
Top Motor Mount ------------------------------------ $ 100.00
Shift Linkage with 2 Rod Ends ---------------------- $  65.00
Custom Seat Upholstery ----------------------------- $ 292.50
30 Amp Circuit Breaker ----------------------------- $   8.99
Mount Tires ---------------------------------------- $  40.99
Assembly Labor ------------------------------------- $1500.00
Twisted Choppers Old Skool Battery Box ------------- $ 105.00
Twisted Choppers Custom Gas Tank ------------------- $ 650.00
Twisted Choppers Custom Oil Tank ------------------- $ 375.00
Twisted Choppers Custom Seat Pan ------------------- $ 100.00
Twisted Choppers Custom Exhaust Pipe --------------- $ 600.00
Twisted Choppers 10.5" Fender w/ Internal Struts --- $ 299.00
Twisted Choppers Side Mount Plate ------------------ $  80.00
Wiring Labor --------------------------------------- $ 200.00
Wiring Supplies ------------------------------------ $  65.00

The above list is close to $35,000 alone, and gives you somewhat of an idea of the money invested in this bike, but.., this list is not complete. There were other items added later which are not all listed here. There was approximately $40,000 total invested over time..!!

The only reason this very cool chopper is now for sale, is because the owner wants to purchase one of the new Camaros when they come out in the next few months and decided he should sell the bike if he is going to purchase another new toy in that price range.

Incidentally, this bike has hidden struts in the rear fender, so you can take your "babe" along if you choose to.

(His wife rode with him numerous times.) All you have to do is add the Pillion Pad with the suction cups and you are set to go..!

Needless to say this is an opportunity to own a super cool chopper from a very respected and well known custom bike builder at an extremely good price for approximately HALF of what it would cost you to get it built today..! And, don't forget that if you were to go to a custom bike builder, you would generally wait at least 6 months to a year to get it built too..!!

Also, consider all the "bugs" that one always has to work out of a new custom bike after it is completed. The long "down time" and headaches involved have already been endured by the original owner and you get to reap the ownership rewards of this super cool chopper without all those aggravations and at approximately half the price. How can you beat that deal? It JUST PLAIN MAKES SENSE, right..??!

OWN THIS CHOP FOR ONLY: $22,950.00

JUST REDUCED $3000..!! $19,950.00

SOLD FOR: $19,950

Disclaimer: All attempts are made to present information as accurately as possible, but we can not be held responsible for errors that may exist.